manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 109 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 109

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

109

The following table describes the SNMP Supported MIBs Status fields.

Table 23.  SNMP supported MIBs

Field

Description

Name

The RFC number if applicable and the name of the MIB.

Description

The RFC title or MIB description.

Configure SNMPv3 users

Any user can connect to the switch using the SNMPv3 protocol, but for authentication and 

encryption, the switch supports only one user (admin). Therefore, you can create or modify 
only one profile.

To configure authentication and encryption settings for the SNMPv3 admin profile by 
using the web interface:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

System > SNMP > SNMPv3 > User Configuration

.

The User Configuration page displays.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments