Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
3-10
Connecting the FWG114P to the Internet
March 2004, 202-10027-01
•
Fixed IP address assignment
Next, the Setup Wizard will report which connection type it has discovered, and then display
the appropriate configuration menu. If the Setup Wizard finds no connection, you will be
prompted to check the physical connection between your firewall and the cable or DSL
modem. When the connection is properly made, the firewall’s Internet LED should be on.
The procedures for filling in the configuration menu for each type of connection follow below.
Wizard-Detected Login Account Setup
If the Setup Wizard determines that your Internet service account uses a login protocol, such as
PPP over Ethernet (PPPoE), you will be directed to a menu like the PPPoE menu in
Figure 3-8
:
Figure 3-8: Setup Wizard menu for PPPoE login accounts
1.
Enter your Account Name (may also be called Host Name) and Domain Name. These
parameters may be necessary to access your ISP’s services, such as mail or news servers. If
you leave the Domain Name field blank, the firewall will attempt to learn the domain
automatically from the ISP. If this is not successful, you may need to enter it manually.
2.
Enter the PPPoE login user name and password provided by your ISP. These fields are case
sensitive. If you wish to change the idle timeout, enter a new value in minutes.