Model FS308 Fast Ethernet Switch Installation Guide
Front Panel
The front panel of the Model FS308 switch contains the following LEDs that
correspond to each network port located on the back of the hub: 100 Mbps link/
activity (100 Link/Act), 10 Mbps link/activity (10 Link/Act), and full-duplex/
collision (FDX/Col). Each vista RJ-45 network port has its own 100 Link/Act
and 10 Link/Act LED as well.
LEDs
The table below describes the activity of the LEDs.
Vista RJ-45 Network Ports with Built-in LEDs
All of the ports on the switch are 10/100 Mbps capable autosensing Ethernet
ports. Each port supports only unshielded twisted pair (UTP) cable using an 8-
pin RJ-45 plug. Each port uses vista RJ-45 connectors that have two LEDs—the
100 Link/Act LED and the 10 Link/Act LED.
Label
Color
Activity
Description
Pwr (Power)
Green
On
Off
Power is supplied to the switch.
Power is disconnected.
100 Link/Act
Green
On
Blinking
The port is operating in 100 Mbps mode.
Data is being received or transmitted at 100
Mbps.
10 Link/Act
Green
On
Blinking
The port is operating in 10 Mbps mode.
Data is being received or transmitted at 10 Mbps.
FDX/Col
Green
Yellow
On
Blinking
The port is operating in full-duplex mode.
A collision is occurring on the segment when the
port is operating in half-duplex mode. (Note that
some collisions are normal.)
Product Illustration
1
2
3
4
5
6
7
8
Power
100 Link/Act.
10 Link/Act.
FDX/Col.
8921FA
PORT
Fast Ethernet Switch
10/100Mbps
100 Link/Act
LEDs
Power LED
10 Link/Act
LEDs
FDX/Col
LEDs
MODEL
FS308
8
Auto 10/100 Mbps
8923EA
100 Link/Act
10 Link/Act
Summary of Contents for FS308 - Switch
Page 1: ......
