Installation Guide for the Model FE104 and Model FE108 Fast Ethernet Hubs
2-4
Physical Description
As illustrated in Figure 2-3, two LEDs are positioned at the top corners of each RJ-45 connector.
The left indicator is the Link/Rx (receive) LED, and the right indicator is the Part (partition) LED.
Both LEDs are described in Table 2-1.
Figure 2-3.
Link/Rx and Part (partition) LEDs on the RJ-45 ports
Normal/Uplink Push Button
The Normal/Uplink push button on the front panel of the hub, as illustrated in Figure 2-4, allows
you to select uplink (MDI) or normal (MDI-X) wiring for Port 4 on the Model FE104 hub and Port
8 on the Model FE108 hub. Ports 4 and 8 are configured for normal wiring when the push button is
in the out position. When the push button is pressed in, Ports 4 and 8 are configured for uplink
wiring.
Figure 2-4.
Normal/Uplink push button
Link/Rx
Part
184EA
183EA
Normal/Uplink
Link/Rx Part
1
2
3
4
MODEL
FE104
Model FE104
Model FE108
Link/Rx Partition
Link/Rx Part
1
2
3
4
5
6
7
8
Normal/Uplink
