7
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the
extenders to your existing router’s WiFi network. You can do this in one of
two ways:
•
Connect with WPS
. For more information, see
Connect with WPS
on
page 7
.
•
Connect with web browser setup
. For more information, see
Connect with Web Browser Setup
on page 9
.
Note:
Each extender must connect to your router’s WiFi network. Do not
connect the extenders to another extender’s WiFi network.
Connect with WPS
Wi‑Fi Protected Setup (WPS) lets you join a secure WiFi network without
typing the network name and password.
Note:
WPS does not support WEP network security. If you are using WEP
security, follow the instructions in
Connect with Web Browser Setup
on
page 9
.
1. Press the
WPS
button on the side panel of the extender.
The WPS LED blinks.
