8
Do More
After your Powerline network is installed and running, you can expand your
network, customize the network settings, and customize security.
Add Adapters
To add adapters before you configure the security feature, just plug them
in and connect the adapters to your equipment.
¾
To add an adapter to a Powerline network with security
set:
1. Plug the adapter into a wall outlet where you want to add Internet
access.
2. If you used a private encryption key, press the
Security
button on
one of the adapters that is already a part of the network for two
seconds, and then press the
Security
button on the new adapter for
two seconds.
Both buttons must be pressed within two minutes.
Note:
The
Security
button does not work in power saving mode.
Do not press the
Security
button on the Powerline adapter until
installation is complete and the adapters are communicating with each
other (indicated by the blinking Power LED). Pressing this button too soon
