Universal Remote User Manual
Programming the NETGEAR Universal Remote
2-7
v1.0, October 2008
Searching for a Device Code
If your device does not respond to the remote after trying all codes listed for your brand, or if your
brand is not listed, try searching for your code:
1.
Press a device button once.
2.
Press and hold
SET
until the red LED blinks twice.
3.
Enter
9 9 1
, then the device group number (see the following table). The LED blinks twice.
4.
Aim the remote at the device, and press
Power
. The remote sends codes from its library to the
selected device, starting with the most popular code first. If the device responds, go to step 7.
5.
If the device does not respond, press
CH+
. The remote will try the next code. Continue until
the device responds.
6.
To search for other device codes, repeat step 1 to step 5.
7.
Press
SET
. This will save the latest code sampled.
Discovering a Device Code
If you set up the NETGEAR Universal Remote using the procedure in
“Searching for a Device
Code” on page 2-7
, you can discover the four-digit code used to operate your equipment.
For example, to find out the code assigned to your TV:
1.
Press
TV
once.
2.
Press and hold
SET
until the red LED blinks twice.
Table 2-2. Device Group Codes
Code
Device Group
0
Cable (cable converters, video accessories, satellite
receivers)
1
TV (TVs)
2
VCR (VCRs, DVD players)
3
Audio (audio amplifiers, audio tuners, CD players)
Tip:
Press
CH-
to try the previous code.
