manualshive.com logo in svg

NETGEAR DG834PN - RangeMax ADSL Modem Wireless Router, Reference Manual

Share
Download
NETGEAR DG834PN - RangeMax ADSL Modem Wireless Router Reference Manual Download Page 89

Reference Manual for the Model DG834PN 108 Mbps RangeMax

TM

 Wireless ADSL Modem Router

Advanced Configuration

7-5

August 2005

— When set to None, it will not send any RIP packets and will ignore any RIP packets 

received. 

•

RIP Version

 

This controls the format and the broadcasting method of the RIP packets that the wireless 
ADSL modem router sends. It recognizes both formats when receiving. By default, this is set 
for RIP-1. 

— RIP-1 is universally supported. RIP-1 is probably adequate for most networks, unless you 

have an unusual network setup. 

— RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 

format. 

— RIP-2B uses subnet broadcasting. 

— RIP-2M uses multicasting.

DHCP

By default, the wireless ADSL modem router will function as a DHCP (Dynamic Host 
Configuration Protocol) server, allowing it to assign IP, DNS server, and default gateway addresses 
to all computers connected to the wireless ADSL modem router's LAN. The assigned default 
gateway address is the LAN address of the router. IP addresses will be assigned to the attached 
PCs from a pool of addresses specified in this menu. Each pool address is tested before it is 
assigned to avoid duplicate addresses on the LAN.

For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. See 

“IP 

Configuration by DHCP”on page B-9

 for an explanation of DHCP and information about how to 

assign IP addresses for your network. 

Use Router as DHCP server

If another device on your network will be the DHCP server, or if you will manually configure the 
network settings of all of your computers, clear the ‘Use router as DHCP server’ check box. 
Otherwise, leave it selected. 

Note: 

If you change the LAN IP address of the wireless ADSL modem router while 

connected through the browser, you will be disconnected. You must then open a new 
connection to the new IP address and log in again.

Summary of Contents for DG834PN - RangeMax ADSL Modem Wireless Router













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands