NETGEAR DG834N Reference Manual Download Page 71 | Manualshive

Page: 71 / 114

NETGEAR DG834N Reference Manual Download Page 71

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual

Managing Your Network

4-15

v1.0, April 2008

•

My Mail Server requires authentication

.If you use an outgoing mail server provided by

your current ISP, you do not need to select this field. If you use an e-mail account that is not
provided by your ISP, select this field, and enter the required user name and password
information.

•

Send E-Mail alerts immediately

.

Select the corresponding check box if you would like

immediate notification of a significant security event, such as a known attack, port scan, or
attempted access to a blocked site.

•

Send Logs According to this Schedule

.

Specifies how often to send the logs: Hourly, Daily,

Weekly, or When Full.

–

Day for sending log

Specifies which day of the week to send the log. Relevant when the log is sent weekly.

–

Time for sending log

Specifies the time of day to send the log. Relevant when the log is sent daily or weekly.

If the Weekly, Daily or Hourly option is selected and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is sent, it
is cleared from the modem router’s memory. If the modem router cannot e-mail the log file,
the log buffer might fill up. In this case, the modem router overwrites the log and discards its
contents.

Running Diagnostic Utilities and Rebooting the Wireless
Modem Router

The modem router has a diagnostics feature. You can use the Diagnostics screen to perform the
following functions from the modem router:

•

Ping an IP address to test connectivity to see if you can reach a remote host.

•

Perform a DNS lookup to test if an Internet name resolves to an IP address to verify that the
DNS server configuration is working.

•

Display the Routing table to identify what other modem routers the modem router is
communicating with.

•

Reboot the modem router to enable new network configurations to take effect or to clear
problems with the modem router’s network connection.

«
...
69
70
71
72
73
...
»

Summary of Contents for DG834N



















































































































Reviews:

No comments