Set Up an IPv6 6to4 Tunnel Internet Connection
The remote relay router is the device to which your modem router creates a 6to4 tunnel. Make sure that the
IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1.
Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
The Basic Settings page displays.
5.
From the Internet Connection Type menu, select 6to4 Tunnel.
The modem router automatically detects the information in the Router’s IPv6 Address on LAN field. This
field shows the IPv6 address that is acquired for the modem router’s LAN interface. The number after
the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address.
If no address is acquired, the field displays Not Available.
6.
Select a Remote 6to4 Relay Router radio button:
•
Auto. Your modem router uses any remote relay modem router that is available on the Internet. This
is the default setting.
•
Static IP Address. Enter the static IPv4 address of the remote relay modem router. Your IPv6 ISP
usually provides this address.
Manage the Internet Settings Manually
72
AC1200 WiFi VDSL/ADSL Modem Router Model D6220