Supplemental Information
150
D6200 WiFi DSL Modem Router
Factory Settings
You can return the WiFi DSL modem router to its factory settings. Use the end of a paper clip
or some other similar object to press and hold the
Reset
button on the back of the router for
at least 5 seconds. The WiFi DSL modem router resets and returns to the factory settings.
Your device returns to the factory configuration settings shown in the following table.
Table 10. Factory default settings
Feature
Default Behavior
Router login
User login URL
www.routerlogin.com or www.routerlogin.net
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
Autosensing
Local network
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.0.2 to 192.168.0.254
Allow a registrar to configure this
router
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
Local network
(LAN) continued
DMZ
Disabled
Time zone
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Time zone adjusted for daylight
saving time
Disabled
Firewall
Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled
