NETGEAR CG3300CMR User Manual Download Page 43

Page: 43 / 88

Administration

Wireless Cable Gateway CG3300CMR

Cable Network Information

The following settings are displayed:

WAN IP Address

. The IP address that the Internet (WAN) port of the gateway uses. If no

address is shown or the address is 0.0.0.0, the gateway cannot connect to the Internet.

Duration

. The time that the unit has been up so far.

Expires

. Expiration time for the WAN DHCP lease.

WAN Subnet Mask

. The IP subnet mask that the Internet (WAN) port of the gateway uses.

WAN Default Gateway

WAN Primary DNS

. The primary Domain Name Server address that the gateway uses. A

Domain Name Server translates human-language URLs such as www.netgear.com into IP
addresses.

WAN Secondary DNS

. The secondary Domain Name Server address that the gateway

uses.

Summary of Contents for CG3300CMR

























































































Search results

Summary of Contents for CG3300CMR

Reviews:

Related manuals for CG3300CMR

Brands by name

Popular brands

NETGEAR CG3300CMR, User Manual

Search results

Summary of Contents for CG3300CMR

Reviews:

Related manuals for CG3300CMR

Brands by name

Popular brands