10
4.
The SATA
interface is up.
Insert the HDD.
5.
Close the latch to secure the
HDD place.
6.
Close the side door of the
router.
Note:
If the latch is not in the
correct position or the HDD is
inserted in the wrong direction,
then the side door to the router
cannot be closed.
If the internal HDD is not
formatted, the HDD LED turns red.
Format the HDD
If you install the HDD during your initial router setup, the router
detects it and prompts you to format the HDD. You can follow the
prompts to do so, or wait until later and log in to the router to format
the HDD from the router menu. See
Format the HDD from the Router
Menu
on page 17.
Remove a Hard Disk Drive (HDD)
To remove the HDD:
1.
Make sure that the router is
turned off.
