NETGEAR C3700v2 User Manual Download

Page: 25 / 107

Specify Initial Settings

WiFi Cable Modem Router Model C3000v2 and C3700v2

View Modem Router Initialization

You can track the initialization procedure of the modem router and get details about the
downstream and upstream cable channel. The time is displayed after the modem router is
initialized.

The modem router automatically goes through the following steps in the provisioning
process:

Scans and locks the downstream frequency and then ranges the upstream channels.

Obtains a WAN address for the modem router.

Connects to the Internet.



To view the status of the modem router initialization:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

Cable Connection

The Startup Procedure section displays the initialization progress.

The Downstream Bonded Channels section displays the status of each channel.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands