February, 2009
Regional Customer Support phone numbers:
This symbol was placed in accordance with the European Union Directive 2002/96 on the
Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the
European Union, this product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names
are trademarks or registered trademarks of their respective holders. Information is subject to change
without notice.
All countries 1-888-638-4327
Germany 0180 590 59 59
Mexico 1800 123 1786
Argentina 0800 666 9838
Finland 020 7928590
Netherlands 020 568 2987
Australia 1300 361 254
France 0820 887 177
New Zealand 0800 174600
Austria 0820 555 644
Hong Kong 800 964 605
Norway 800 12 500
Belgium 078 15 06 73
Hungary 1 23 55 353
Poland 22 583 4381
Brazil 0800 761 0021
India 1800-425-4327
Russia 810-800-20931032
Bu 359 2 97 444 70
Italy 0238 591 018
Singapore 800 6011 369
Canada 1-888-NETGEAR
Ireland 1800 453019
Slovakia 02 5010 2648
Chile 800 472001
Japan 0120-921-080
Spain 90 099 5462
China 800-830-3815
Korea 080-638-4327
Sweden 0770-93 00 33
Columbia 01800-700-2102
Lux (Deu) 0049 180 590 59 59
Switzerland 0848 000 195
Czech Republic 296 335 656
Lux (Fra) 0033 820 88 71 77
Thailand 1800 060 013
Denmark 80 702 666
Malaysia 1800 880 023
UK 0844 875 4000
US 1-888-NETGEAR
Radiation Patterns
NETGEAR 7 dBi Omni-directional Antenna ANT2407 Specifications
Frequency range
2.4~2.5GHz
Impedance
50 Ohmns
Gain (excluding cable loss)
7 dBi@ 2.45GHz
Operating temperature
–10 to 60° C (14 to 140° F)
Storage temperature
–10 to 70° C (14 to 158° F)
Humidity
95% RH
Radome material
ABS
HPBW/H-plane
360°
HPBW/E-plane
21.6°
Dimensions (l x w x h)
114 x 169 x 302 mm (4.5 x 6.7 x 12 in)
Weight
240 gf
Connector
RP SMA Female Reverse
Warranty
2 year
Impedance
50 +/- 5 Ohms
V-Plane Co-Polarization Patterns
H-Plane Co-Polarization Patterns
2.4GHz
2.45GHz
2.5GHz
2.4GHz
2.45GHz
2.5GHz
-15
-10
-5
0
5
10
0
30
60
90
120
150
180
210
240
270
300
330
-15
-10
-5
0
5
10
-15
-10
-5
0
5
10
0
30
60
90
120
150
180
210
240
270
300
330
-15
-10
-5
0
5
10
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number of your product and use it to register
your product at
http://www.NETGEAR.com/register
. Registration is required before you
can use our telephone support service. Registration via our website is strongly
recommended.
Go to
http://kbserver.netgear.com
for product updates and Web support
.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves
the right to make changes to the products described in this document without notice. NETGEAR does not
assume any liability that may occur due to the use or application of the product(s) or circuit layout(s)
described herein.
Federal Communications commission (FCC) Compliance Notice:
Radio Frequency Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
To comply with FCC regulations, the ANT2407 should only be used with devices that have been FCC
approved for use with the NETGEAR ANT2407. Check the NETGEAR website at
http://tools.netgear.com/legal/fcc_antennas.html for an updated list of FCC approved devices.
Note:
This equipment has been tested and found to comply with the limits for Class B digital devices,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna; (2)
Increase the separation between the equipment and receiver; (3) Connect the equipment to an outlet or
circuit different from that to which the receiver is connected; (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC and EU Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the
antenna must be less than 20 cm (8 inches) during normal operation.
This device should not be co-located with other transmitters.
For EU, use of any antenna requires careful planning and extra considerations to comply with EU
emissions and health standards and regulations. Antenna installation must comply with the maximum
level authorized by each country.