Security Gateway Manual
SG-2100
4.1.2 Switched Ethernet
Interface Name
Port Name
LAN1
mvneta1
LAN2
mvneta1
LAN3
mvneta1
LAN4
mvneta1
The four LAN Ethernet ports are switched ports. By default all of these ports as a single switch uplinked to the LAN
interface on the firewall.
Note:
For more details on how the switch operates, see
For instructions on how to configure the switch see
LED Pattern
Description
Both LEDs green
Left Flashes with
1Gb
traffic, solid with link.
Left LED only green
Left flashes with
100Mb
traffic, solid with link.
Right LED only green
Left Flashes with
10Mb
traffic, solid with link.
Warning:
The LAN ports do not support the Spanning Tree Protocol (STP). Two or more ports connected to
another Layer 2 switch, or connected to 2 or more different interconnected switches, could create a flooding loop
between the switches. This can cause the router to stop functioning until the loop is resolved.
4.1.3 Other Ports
• Power (12 VDC with threaded locking connector)
• Recessed Reset Button (performs a
• USB 2.0 Port
• Micro SIM
•
• 3x SMA-sized antenna holes (covered by rubber caps)
Note:
The reset button is only used to reset the system back to factory defaults. It does not respond when pushed
while the system is running. See
© Copyright 2022 Rubicon Communications LLC
14
