Security Gateway Manual
Netgate-6100
2.1.3 Mounting the Power Supply
The mounting bracket for the power supply uses two zip-ties to hold the power supply to the mounting bracket. There
is no PDF for the Power Supply Bracket. Use the holes directly to mark the wall for mounting.
2.2 Connecting to the Console Port
There are times when directly accessing the console is required. Perhaps webGUI or SSH access has been locked out,
or the password has been lost or forgotten. This guide shows how to regain access directly through the console.
2.2.1 Install the Driver
A
Silicon Labs CP210x USB-to-UART Bridge
driver is used to provide access to the console, which is exposed via
the
USB Mini-b (5-pin)
port on the appliance.
If needed, install an appropriate
Silicon Labs CP210x USB to UART Bridge
driver on the workstation used to connect
with the system.
Windows
There are drivers available for Windows
Mac OSX
© Copyright 2022 Rubicon Communications LLC
26
