Quick Start Guide Version 1.1
Ethernet Serial Server
GW312/GW315
Copyright © 2006 Neteon Technologies, Inc.
All rights reserved. Designed in Taiwan.
3
A
Configuration by Telnet
1.
Telnet to GW312/GW315 using DOS command “
Telnet IP_address
”. Example: telnet 10.0.50.100
2.
GW312/GW315’s network, link mode and COM ports settings can be configured in the telnet
window
B
Configuration by Management.exe Utility
Use
Management.exe
on Product CD to configure the GW312/GW315.First click
”
Config
” then assign
a static IP.
C.
Configuration by Web Browser
1.
Make sure the PC is on the same network as GW312/GW315
2.
Open a web browser, then Enter in the IP address as the GW312/GW315. The default user name
is
admin
and default password is
default
.
3.
The
GW312/GW315’s network, link mode and COM ports settings can be configured on different
web pages.
4.
Click “
Save Configuration
” to save settings.
5.
Click ”
Restart
” button to initiate the change.
4
Pin Assignments
The pin assignments of
DB9
connector on
GW312
is shown in the following table:
Pin#
RS-232
Full Duplex
for
GW312
Model
RS-485
2 wire, Half Duplex
for
GW312
Model
RS-485/RS-422
4 wire, Full Duplex
for
GW312
Model
1
DCD
N/A
N/A
2
RXD
N/A (reserved)
TXD+
3
TXD
DATA+
RXD
+
4
DTR
N/A
N/A
5
SG (Signal Ground)
SG (Signal Ground)
SG (Signal Ground)
6
DSR
N/A
N/A
7
RTS
DATA-
RXD-
8
CTS
N/A(reserved)
TXD-
9
N/A
N/A
N/A
The pin assignments of
Terminal Block
connector on
GW315
is shown in the following table:
Pin#
RS-485/RS-422
4 wire, Half Duplex
For
GW315
RS-485
2 wire, Full Duplex
For
GW315
1
T+
NC
2
T-
NC
3
R+
Data+
4
R-
Data-
5
SG (Signal Ground)
SG (Signal Ground)
Customer Services and Supports
Telephone
: Toll Free 1-888-908-3330, Outside USA: +1-732-568-1988
Email:
Web:
www.neteon.net
