Distribué par / Distributed by / Distribuito da NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
3. FUNCTION
Ø
Detection range setting (sensitivity)
Reach is the term used to describe the radii of the more or less circular detection zone produced on the ground
after mounting the sensor light at a height of 2.5m Distance switch 1 and 2: detect distance 3m, 5m, 8m, 10m
NOTE: the above detection distance is gained in the case of a person who is between 1.6m~1.7m tall with
middle figure and moves at a speed of 1.0~1.5m/sec. If person’s stature, figure and moving speed change, the
detection distance will also change.
Ø
Time setting
The light can be set to stay ON from 10s to 10min. Any movement detected before this time elapse will re-start
the timer. It is recommended to select the shortest time for adjusting the detection zone and for performing
the walk test. Time switch 3 and 4: time delay 10s, 1min, 5min, 10min
