NetComm V300, Specifications

Page: 2 / 2

Internet
PSTN
Connected to
3 LAN ports
Analogue telephone for
standard and VoIP calls
Phone port
(FSX port
)
Line in
(FXO port)
W
AN port
RJ-11 Wall
Socket
Microfilter
ADSL Modem
TYPICAL ADSL CONFIGURATION
(Cable Modem setup will differ – see User Guide for details)
RJ-11 Telephone line
RJ-45 Ethernet cable
V300
TECHNICAL SPECIFICATIONS
V300 PORTS
• 1 x WAN port RJ-45 IEEE 802.3 10/100 Base-T, Auto-crossing
• 3 x LAN port RJ-45 IEEE 802.3 10/100 Base-T, Auto-crossing
• 1 x FXS RJ-11 for connection to analogue telephone
• 1 x PSTN RJ-11 for connection to normal telephone line to
provide lifeline and PSTN pass-through
WAN PROTOCOL SUPPORT
• DHCP client (RFC 2131) • Static IP
• PPP over Ethernet client (RFC 2516)
INTERNET SUPPORT
• IP, TCP, UDP, ICMP, ARP protocols • HTTP • DNS
VoIP PROTOCOL SUPPORT
• Session Initiation Protocol (SIP, RFC 3261)
• Session Description Protocol (SDP, RFC 2327)
• Transport Protocol for Real-Time Applications (RTP, RFC 1889)
VoIP AUDIO CODEC
• G.729a • G.711 alaw • G.711 ulaw
DTMF RELAY
• In-band • Out-band (RFC 2833)
VOICE FEATURES
• Echo Cancellation (G.168) • Voice Activity Detection (VAD)
• Comfort Noise Generation (CNG) • Silence Suppression
• Jitter Buffer • Adjustable RTP packetisation interval
TELEPHONE FUNCTION SUPPORT
• Lifeline (enables PSTN voice service if VoIP service is unavailable)
• PSTN pass-through (enables you to receive PSTN and VoIP
calls using a single analogue phone)
• Caller ID (On/Off hook Caller ID ETSI based)
• DTMF tone generation
• Dial tone, Busy tone, Ring back tone generation
VoIP CALL TYPES
• SIP proxy • Phone Book for Peer-to-Peer IP Call
QUALITY OF SERVICE (QoS)
• Internal Bandwidth Shaping ( The system dynamically
calculates the necessary bandwidth required to maintain
optimal voice quality)
BUILT-IN ROUTER
• DHCP client/server • NAT Firewall • Port forwarding
• DMZ • Virtual server
VPN SUPPORT
• IPSec and PPTP pass-through
SECURITY
• PAP/CHAP for PPPoE authentication
• MD5 for SIP registration authentication
OTHER VoIP CALL FUNCTIONS*
• Call Transfer • Call Waiting • Call Hold/Resume
• Call Forward • Call Switch • CFU (Call Forward
Unconditional) • CFB (Call Forward Busy)
LED
• Power, WAN, LAN 1x, LAN 2x, LAN 3x, Line, Phone
POWER SUPPLY
• External power adapter 240V AC (in) ~ 12V DC/1.5A (out)
ENVIRONMENTAL CONDITIONS
• Operating temperature 0 ~ 50°C
• Relative humidity 5 ~ 90% (non-condensing)
DIMENSIONS
• 227 mm (W) x 40 mm (H) x 144 mm (D)
MINIMUM SYSTEM REQUIREMENTS
• An account with a VoIP Service Provider • Broadband
service – ADSL or Cable • Broadband Modem/Router with
Ethernet Port (bridge-mode capable^) • Analogue telephone
with RJ-11 line cord (desktop, cordless or DECT) • RJ-11 line
splitter and ADSL micro filter† • A PC with Ethernet port and
Web browser (for V300 configuration only)
PACKAGE CONTENTS
• V300 VoIP Telephone Adaptor/Router
• 12V DC 1.5 Amps power supply
• RJ-11 line connection cable
• RJ-45 10/100 Ethernet cable
• CD with User Manual
• Package Contents List
• Quick Start Guide
* Note: The availability of some listed call features are dependent on the
service supported by your VoIP service provider. Please consult them for
further information.
^ In some cases, you may need to configure your broadband Modem/Router
in bridge-mode. The V300 will perform the routing on your network.
† A micro filter is required if you plan on using your existing telephone service
(landline) with the V300 and your ADSL Modem.
V300
VoIP Telephone Adaptor/Router
NETCOMM LIMITED
ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
Your NetComm dealer:
KEY FEATURES
Make and receive VoIP or PSTN calls from one
telephone handset
Landline telephone backup when your Broadband/VoIP
service is down
Choose to call out on either your VoIP or landline
telephone service
QoS (Quality of Service) router to maintain VoIP call quality
FXS/FXO telephone ports and 3-port LAN switch
Supports supplementary Call services – Caller ID, Call
On-Hold, Call Forward, Call Waiting and Transfer – service
provider dependent
Simple web-based setup and configuration
3-YEAR WARRANTY WHEN YOU REGISTER ONLINE
1 year warranty out of the box. Extra 2 years FREE with
online registration at
www.netcomm.com.au
(Conditional upon online registration)