V24W
Quick Start Guide
YML8�2
�2
www.netcomm.com.au
SeCtion 2
Battery inStaLLation
a.
Remove the battery compartment cover by pressing the silver button and sliding the battery cover
downwards.
b.
Insert the battery and ensure that the metal contact at the bottom of the battery aligns with the metal
contact on the top of the battery compartment.
c.
Replace the battery cover by sliding it upwards until it snaps into place.
SeCtion 3
Charge the Battery
a.
Connect the mini USB connecter of the supplied charger to the mini USB port at the bottom of the phone.
b.
Plug the power adaptor to a power outlet and the Power LED will flash.
Note: For initial charging, please allow the battery to charge for ten hours before use. When the battery is low on power, it will emit one
warning sound or vibration, unless the Ring Type is set to Silent. (For more information about Ring Types, refer to the User Guide).
Note: Only use the included power adaptor.
Do not
use another power adaptor with the same USB connector as this may damage your phone.
