V400 Series VoIP Gateway User Guide
13
YML832 Rev1
2. Installation
and
Applications
Connecting your V400 Series Gateway
1. Connect the WAN port of your V400 Series VoIP Gateway to your Broadband Modem using an
ethernet cable.
2. Connect the power adapter to your V400 Series VoIP Gateway and plug it into a powerpoint.
Please use the power adapter that comes with VoIP gateway. Using an adapter
other than the one supplied with the VoIP gateway, may cause problems and will
affect the warranty of the product.
3. Connect the Phone or PSTN lines as required to setup your V400 Series VoIP Gateway. The way
you setup the lines will depend on the model you have purchased. Refer to the following sections
on both Network Connections and Telephone Connections for more information on the possible
applications of your V400 Series VoIP Gateway.
Once you have connected your gateway you can configure it using one of the two configuration options
provided:
1) Web Interface
2) Telephone IVR (Interactive Voice Response)
The IVR provides basic query and configuration, while the Web interface provides a full configuration.
