NTC-402
–
Telstra Private IP WAN Configuration Guide
8 of 11
CG01068 v. 1.0 October 2018
© NetComm Wireless 2018
8
Enter the following details in this page:
I T E M
D E S C R I P T I O N
T E L S T R A S E T T I N G S
NAT
Disable the NAT (Network Address Translation)
functionality.
Enable
Network Monitoring
Disable the Network Monitoring functionality.
Enable
Table 3
–
Virtual Server Rule Configuration page
9
Scroll to the bottom of the Internet Setup tabbed page and click the Save button to apply the changes you
have made.
Disable SPI
10
Open Security >> Firewall and click the Options tab:
Figure 5
–
Basic Networking > WAN & Uplink > Internet Setup tabbed page
11
Enter the following details in this page:
Firewall Options
I T E M
D E S C R I P T I O N
T E L S T R A S E T T I N G S
SPI
Disable the SPI (Stateful Packet Inspection, also known
as stateful firewall) functionality.
Enable
Allow Ping from WAN Enable so that ping tests can be performed over the
wireless IP WAN.
Enable
Table 4
–
Firewall Options
