| W
ireless
M2M
10
Wireless LAN connection
The NTC-140W Series router can operate in Access Point or Client Mode. The
NTC-140W Series router has the Wireless LAN enabled and operates in Access
Point mode by default.
Access Point Mode
The WiFi Network Name (SSID) and WiFi Security Key are unique for your device
and are printed on the back of your NTC-140W Series router. The credentials are
also printed on the Wireless Security Card.
Wireless Security Card
Keep this card in a secure place for easy access
to your NetComm Wireless M2M device
Wireless Network Name (SSID)
NetComm 1234
Wireless Security Key
ABCDE12345
IMEI
123456789123456789
Follow these steps to connect your client device to the Internet over the wireless
network:
1.
Turn on the wireless radio on your client device.
2.
Open the wireless network manager on your client device and connect to the
Wireless Network Name (SSID) printed on the Wireless security card.
3.
When prompted for your wireless security settings, enter the Wireless Security
Key. Wait a few seconds for the connection to be established.
Client Mode
To use your NTC-140W router in Client Mode, you must first change the Wireless
mode on the web user interface. To set wireless client mode:
1.
From the top menu bar, select the
Networking
option.
2.
Select
Wireless settings
on the left, then the
Wireless mode
sub-menu item
3.
Select the
Client
option and then click the
Save
button.
For further detail on using Wireless client mode, refer to the product user guide.
