NetComm NS380, User Manual

Page: 66 / 76

66 NS380 / NS380W User Guide
YML826 Rev1 - Pan/Tilt Internet Camera
Appendix G: Glossary of Terms
NUMBERS
10BASE-T 10BASE-T is Ethernet over UTP Category III,IV, or V unshielded
twisted-pair media.
100BASE-TX The two-pair twisted-media implementation of 100BASE-T is called
100BASE-TX.
802.11g An IEEE standard for wireless local area networks. It offers
transmissions speeds at up to 54 Mbps in the 2.4-GHz band.
A
Access point It is the hardware interface between a wireless LAN and a wired
LAN. The access point attaches to the wired LAN through an
Ethernet connection.
Applet Applets are small Java programs that can be embedded in an HTML
page. The rule at the moment is that an applet can only make an
Internet connection to the computer form that the applet was sent.
ASCII American Standard Code For Information Interchange, it is the
standard method for encoding characters as 8-bit sequences of
binary numbers, allowing a maximum of 256 characters.
ARP Address Resolution Protocol. ARP is a protocol that resides at the
TCP/IP Internet layer that delivers data on the same network by
translating an IP address to a physical address.
AVI Audio Video Interleave, it is a Windows platform audio and video
file type, a common format for small movies and videos.
B
BOOTP Bootstrap Protocol is an Internet protocol that can automatically
configure a network device in a diskless workstation to give its own
IP address.
C
Communication Communication has four components: sender, receiver, message, and
medium. In networks, devices and application tasks and processes
communicate messages to each other over media. They represent the
sender and receivers. The data they send is the message. The cabling
or transmission method they use is the medium.
Connection In networking, two devices establish a connection to communicate
with each other.