background image

Rev. 1 - YML657

www.netcomm.com.au

NP3640 Fast Ethernet Mini Print Server User Guide

Page 43

NetWare

General

NetWare Mode

Select Print Server or Remote Printer, as appropriate. The
default is Print Server.

Frame Type

Select the frame types used by your network. (Ethernet 802.2,
Ethernet 802.3, Ethernet SNAP, and Ethernet II) By default, all
frame types are enabled.

Remote Printer Mode

Novell Printer Server for P1

NetWare print server to service the Print Server's parallel port 1.

Novell Printer Server for P2

NetWare print server to service the Print Server's parallel port 2
(P2), if fitted.

Print Server Mode

NDS Tree Name

(NDN mode only) The File Server's NDS tree name. (root name)

NDS Context

(NDS Mode only) Path to the NDS Context. This does not
include the Context itself, and each OU should be separated by a
period. e.g. department.company

Master File Server

(Bindery Mode only)  Name of the Print Server's master file
server.

NetWare Password

The password on the NetWare Server. The Print Server device
needs this password to connect to the NetWare server.

Summary of Contents for NP3640













































































Reviews: