To connect to the Internet
1. Install
a. Connect the
yellow Ethernet cable
to one of the 4 yellow Ethernet ports
found at the back of the modem. Connect the other end of the cable to an
available Ethernet port on your computer.
b. Connect the
gray telephone cable
to the gray port on the back of the
modem and connect the other end to the telephone port on your wall*.
c. Connect the
power cord
to the back of the modem and insert the plug pack
into a power point. Then turn ON the power button on the back of the modem.
2. Configure
a.
Insert the CD
, when the CD loads click on
Setup my Modem
.
b. Click on
NB7 Series Wizard
.
b. Follow the steps shown.
3. Enjoy!
If you have lost the CD please turn over for instructions
on how to manually set up your modem.
* Please note, to ensure you receive the best performance from your modem you must use a filter on all telephone devices
using the same line.
(Recommended NetComm EM1550 ADSL2+ Line Filter)
NB7 Series
– Quick Install Guide
Let’s get started >
