NetComm NB16WV Faq Download Page 5

Page: 5 / 5

If you still cannot connect your mobile device using the WPA-PSK network
authentication, use the WEP network authentication by following these

steps:

In the Wireless Settings, change the

Authentication

type to

Open

, change

802.1x

Disabled

and

change

Encryption

WEP

The current wireless security key is the WEP Key that is selected. In this example, the network key is the

WEP Key 1

which is

a1b2c3d4e5

. You will need the security key to connect your device to the wireless

network.

Click the

Save

button.

Summary of Contents for NB16WV

Page 1: ...What if my mobile device does not connect to the wireless network NB16WV ...

Page 3: ... that the Enable tickbox is Unticked This will allow wireless devices connect to your router without needing to type in the MAC Address Note that you will still need to use a wireless security key to connect in most instances 6 Click on the Save button 7 Click on the Network Setup menu then click the Wireless option ...

Page 4: ...t the Network Authentication type is WPA PSK The example below shows the security or preshare key as a1b2c3d4e5 You will need the security key to connect your device to the wireless network 9 Click the Save button ...

Page 5: ...the Wireless Settings change the Authentication type to Open change 802 1x to Disabled and change Encryption to WEP 2 The current wireless security key is the WEP Key that is selected In this example the network key is the WEP Key 1 which is a1b2c3d4e5 You will need the security key to connect your device to the wireless network 3 Click the Save button ...