www.netcomm.com.au
Rev.1 - YML626
Page 12
NB1200 ADSL USB Modem
Windows Me
Step 1 - Loading the drivers and connecting your modem
■
Have your modem and cables ready, but do not connect them until prompted.
■
Start Windows and log-in as
Administrator
if required.
■
Insert your CD-ROM. The driver software will autolaunch and the installation will
begin.
■
When the licence screen appears click
Yes
to continue the installation.
■
When the
Process is going on
screen appears, connect the USB cable into your
computer’s USB port and then into the USB socket at the rear of the modem.
■
Windows will detect your modem and launch the new hardware wizard.
Note:
You may need to insert your original Windows Me CD-ROM (as supplied
by Microsoft). You may also be required to authorise installation of
unsigned drivers.