IAC4000 - Internet Access Controller User Guide
YML728Rev1
134
www.netcomm.com.au
Time to Finish
Service providers create a subscriber account with a "session timeout" parameter. For example,
"Session Timeout"=2 hours account was created and assign to subscriber. When subscriber
login, system will send an "Access Request" attribute to RADIUS Server, if subscriber's
account is a valid account, RADIUS Server will reply "Access Accept" with "session timeout".
System will send a "logout Window" only has countdown time start from 2:00:00 but no
Logout Button to subscriber's browser. Now subscriber could use the service for 2 hours, after
2 hours system will disconnect subscriber's connection automatically. However, subscriber is
not allowed to logout manually. When system terminate the connection with subscriber at the
same time it will send "Accounting Stop" include used time=7200 sec. to Radius Server. This is
to say that this account only allowed for one time use.
Note:
If "Time to finish" is selected, but RADIUS Server do not reply "Session
Timeout", an error message "No Session Time out" will pop up on subscriber's
browser.
Figure A-5 Time to Finish
Figure A-6 Logout Window
Summary of Contents for IAC4000
Page 1: ......
