Installation – Netbiter EC350 Starter Kit
10 (36)
3.2
Ethernet Network
Ignore this step if you are only going to connect via mobile network.
1.
Connect an Ethernet cable with an RJ-45 plug to the
WAN
port.
2.
Connect the other end to a network with Ethernet access.
Read
Network Configuration and Security, page 8
before attempting
to connect to an Ethernet network.
3.3
Connecting the Power Supply
1.
Insert the 2–pin connector block into the Netbiter EC350.
2.
Connect the
red
wire to the
+
connector.
3.
Connect the
black
wire to the
–
connector.
Netbiter
®
EasyConnect Starter Kit User Manual
Doc ID: SP1706
Version: 3.00
