Netatmo Smart Indoor Siren, User Manual

Page: 4 / 23

4
Setup from a smartphone or PC
In order to add the Netatmo Indoor Siren to a Welcome camera, follow the instructions on its
quick start guide, or click on "Add a new product" in the settings menu. The app will guide
you through the installation.
1. Launch the setup assistant from the Netatmo Security app on your smartphone, tablet
or PC.
2. Turn the Welcome camera upside down so that it starts pairing mode. It will blink in
blue.
3. Remove the batteries from the Siren and reinsert them. You need to use a Philips
screwdriver to access the battery compartment.
4. Once the batteries have been reinserted, place the Siren next to the camera (at about
10 cm).
5. The green LED on the Siren will blink and then stay solid for 5 seconds. This means
the pairing is complete.
6. Finish the setup on the app and place the Siren at its final spot in your home.
The Siren needs to be placed on the wall or the ceiling, using the provided wall mount, in the
same room as the Welcome camera it is paired to.
The plate has an engraved drawing that indicates which way the logotype will be facing. It
also has a hole to pass the USB cable. Choose the orientation according to your needs.
Use the two provided screws to secure the plate to the wall or ceiling. The Siren attaches to it
when it is put on the plate and turned clockwise.