INSTALLATION GUIDE :
4. PRESENTATION OF THE APPLIANCES
Copyright NETASQ 2010
Page 17/66
WARNING
You are strongly advised against unplugging the product when the
Status
LED is restarting, shutting
down or being updated.
The
Status
LED will blink (quick blinking every 250 milliseconds) in the event of a major failure of the product
(hardware modification, faulty network interface, etc). In this case, do contact your distributor.
For an appliance configured in high availability, the
Online
LED will light up intermittently (for every second it
lights up, it will go off for 2 seconds). This means that the appliance is in passive mode.
Points 3, 4 and 5
: these different ports enable access to the appliance in console mode.
The LEDs above the interfaces provide indications as to the throughput. For the U70, if the left LED lights up
on an IN interface, this indicates a throughput of 10 mbits/s, 2 LEDs that light up indicate a throughput of 100
mbits/s and if the right LED lights up, this indicates a throughput of 1000 mbits/s.
One or two blinking LEDs on an IN interface indicate the presence of network activity.
NOTE
: power is supplied to this appliance from outside the rear panel. An upgrade to version
8.0 is recommended.
4
4
.
.
4
4
T
T
h
h
e
e
U
U
1
1
2
2
0
0
a
a
p
p
p
p
l
l
i
i
a
a
n
n
c
c
e
e
The U120 appliance has the following characteristics:
Throughput of 700 Mbits/s.
200,000 concurrent connections.
6 Gigabit interfaces.
6,500 new sessions per second.
1. Software
shutdown
button.
2. LEDs from bottom to top: Power/Status/Online.
3. Serial port: for connecting the firewall directly to a PC or modem.
4. PS2 mini-din port: for connecting a keyboard.
5. VGA port: for connecting a monitor.
6. Button to reset to the default configuration (defaultconfig).
7. 1 USB port: for secure configuration or updates.
1
8
2 3
4
5
6 7
9
