Netac AirTrack T600 Mini Wireless Router
15
Table 5.4 AP Router Mode - Advanced Settings
Field
Description
Beacon Interval
Beacon interval (milliseconds).
RTS Threshold
RTS threshold.
DTIM Interval
DTIM interval.
Protection Mode
Allows user to force 802.11g Protection (RTS/CTS) mode off.
Transmit Rate
Select transmit rate: Auto (Default) or a fixed rate.
Preamble Type
Select: Short preamble, Long preamble or Auto.
Connect Repeater
Disable/Enable the use of a Repeater.
Repeater MAC Address MAC address for each Repeater. Up to two Repeaters can be connected.
5.1.2.1 Connect Repeater
Up to two Repeaters can be connected. If a Repeater is used along with the Access Point, the settings steps
are the following:
1. Go to the Advanced Settings Page.
2. Select
Enable
for the
Connect Repeater
field.
3. Enter the MAC address for each Repeater in the
Repeater MAC Address
field.
5.1.3 AP Router Mode - Access Filter (MAC Filter List) Setup
Click the
Access Filter: Setup
button in the AP Router Mode setup page (Figure 5.2) to access the Access
Filter page. The Access Filter page allows the user to configure T600 to allow or deny association to itself
based on the MAC address of the client. Up to 32 MAC addresses can be added to the list. Figure 5.6 and
Table 5.5 detail the options.
