Setup
Overview
The following sections explain the software and hardware instal-
lations for the Yap Phone. Please note that you must install all
of the software and reboot the computer before connecting the
Yap Phone to your USB port. Before you begin the setup
process, please make sure you have the following:
• Net2Phone CD-ROM (for software installation)
• Yap Phone
• Yap Time card (contains account number and PIN, can
also be used as a calling card)
• Your Windows 98 CD-ROM (you may need this during
installation)
Software Setup
In order to install the Yap Phone software, follow these steps:
• Check the system tray in bottom right hand corner of your
screen to make sure no programs are running
• Insert the Net2Phone CD-ROM
• Click on the “Install Software” button (If your CD autorun is
disabled, access Windows Explorer and double click on
Setup.exe in your CD-ROM drive)
• Restart your computer
Once your computer has rebooted and you have accepted the
terms of the licensing agreement, you will need to enter the
account number and PIN located on the back of your Yap Time
card. Enter your account number and click “OK”. Then, you will
be prompted for your personal ID number. Enter your PIN and
click “OK”. You are now ready to run the Setup Wizard.
Contents
Introduction
Setup
Software
Hardware
Using the Yap Phone
PC2Phone Call
PC2PC Call
Net2Fax
Additional Features
VoicEmail
Shopping
with EZsurf
tm
Accessing Account
Information
Dialing Tips
Troubleshooting
Support
Safety Instructions
Appendix
6
Summary of Contents for Yap Phone
Page 1: ...User Guide Phone ...
