Page 3
Net2Phone MAX 410 Hardware Setup
Identifying Your Ports
You need to be able to identify the MAX’s physical port numbers before you can
begin configuring its LAN settings.
The RJ-11 sockets are visible on the MAX’s rear panel. Figure 1, below, shows
the rear panel of a MAX with 4 ports.
Physical Port Numbering
Figure 1 illustrates the
physical
port numbering on the MAX 410’s rear panel for a
unit with 8 ports installed. (Your unit may have only 4 ports.) These numbers are
referenced by the MAX Web Manager when identifying ports, setting up the
MAX’s features and configuring Net2Phone calling accounts.
Figure 1
As the illustration shows, the ports are numbered from left to right. The left-most
port is Port #1 and the last is #4.
Ports also have
logical
numbers, used by the Routing Table, which are different
from their physical numbers. (See Section 4.5,
The Routing Table
, in the MAX 410
User Guide).
Net2Phone MAX 410 – Quick Start Guide
Hardware Setup
