Slide 1x M10x20 Bolt (38049) into the base of both Uprights
(PA45300).
Place the left hand Bottom Bracket (39163) onto the Upright and ensure
the M10x20 Bolts slot through the holes of the Bottom Brackets,
as per diagram.
Fix the End Cap (39177) to the bottom of both Upright.
Secure the Bottom Bracket, using an M10 Washer (38088)
and M10 Lock Nut (38077) on each Bracket.
4.
Fig.4
Fig.5
STEP 4 - Fixing Crossbar to Uprights (Fig. 4)
Step 5 – Fix Bottom Bracket to Uprights (Fig. 5)
Place the Left Corner Bracket (39286) onto the Corner Joint
(PA45311).
Ensure the M10x20 Bolts (38049) are positioned correctly
and slot through the holes of the Corner Bracket.
Place M10 Washers (38088) over bolts and secure Corner
Bracket in place with M10 Nuts (38077).
Repeat for Right Corner Bracket (39285).
38049
PA45300
39286
38088
38077
30177
PA45300
PA45311
PA45300
39286
Repeat the above for the right hand side..
