3.
38049
STEP 1 - Crossbar/Backbar (Fig. 1)
Fig.1
Layout the Crossbar (37901) and Connector (37934).
Slide 2x M10x20 Bolts (38049) into each Crossbar Section
(37901).
Slot the Connector (37934) into the Crossbar (37901) ensuring
that the holes align.
37901
37901
37934
STEP 2 - Crossbar/Backbar (Fig. 2)
Screw M8 Hex Bolt (38701) into Connector (37934) ensuring the
M8 Spring Washer (38099) is in place as per diagram.
Slide the Straight Bracket (38027) onto the M10 Bolt (38099).
Place M10 Washer (38088) over pre-inserted bolts and secure in
place with M10 nut (38077).
Repeat STEP 1 & 2 for the Backbar.
STEP 3 - Attach Crossbar to Uprights (Fig.
Slide 4x M10x20 Bolts (38049) into the Crossbar.
Slide 1x M10x20 Bolt into Corner (38016) and 2x M10x20 Bolt
into upright as per Fig.3a.
Slide the Corner Joint into the Crossbar and Upright.
Fig.2
Fig.3
38027
38099
38071
38088
38077
Fig.3a
38016
38049
WEIGHTS - PLEASE NOTE!
If weights have been bought please slot into place as per diagram
Fig.13
*see ‘add-on’s’ for instructions.
