background image

220-0000022 rev03

(A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, 
less constant rate.)

220-0000022 rev03

© Copyright 2001 Net to Net Technologies, Inc.

™ The Net to Net Logo is a trademark of Net to Net Technologies, Inc. 

Fast 
Ethernet 
100

solid green

Fast Ethernet connection (100 
Mbps) is established

If the Fast Ethernet 100 LED is illuminated, the Fast 
Ethernet Lnk LED will also be illuminated.

Note: A solid green Fast Ethernet 100 LED can also 
denote an E3 Alarm 

if

 the Fast Ethernet Act and Lnk 

LEDs show solid illumination and the E3 Lnk LED 
remains unlit.

no 
illumination

no Fast Ethernet connection

If the Fast Ethernet 100 LED remains unlit but the Fast 
Ethernet Lnk LED is illuminated then a connection has 
been established at 10 Mbps rather than 100 Mbps.

Fast 
Ethernet Act

pulsing 
amber

typical Ethernet activity

Traffic is flowing without any problems.

solid amber heavy traffic

Note: A solid amber Fast Ethernet Act LED can also 
denote an E3 Alarm 

if

 the Fast Ethernet 100 and Lnk 

LEDs show solid illumination and the E3 Lnk LED 
remains unlit.

no 
illumination

no Ethernet activity

Either there is no Ethernet link or a link exists but 
there is no activity.

Fast 
Ethernet 
Lnk

solid green

Ethernet connection is established If the Fast Ethernet Lnk LED is illuminated but not the 

Fast Ethernet 100 LED then a 10 Mbps connection has 
been established. If the Fast Ethernet 100 LED is also 
illuminated, then a 100 Mbps connection has been 
established.

Note: A solid green Fast Ethernet Lnk LED can also 
denote an E3 Alarm 

if

 the Fast Ethernet 100 and Act 

LEDs show solid illumination and the E3 Lnk LED 
remains unlit.

no 
illumination

no Ethernet connection

The Fast Ethernet Act and 100 LEDs will remain unlit 
by default.

Worldwide Headquarters

Net to Net Technologies
112 Corporate Drive, Suite 1
Portsmouth, NH 03801
USA
+1 877-638-2638

http://www.NetToNet.com/

[email protected] 

EMEA Headquarters

Net to Net Technologies

Victoria House 19 Park Way

Newbury Berkshire RG14 1EE

UK

+44 (0) 1635 570950

Summary of Contents for ENE3400-P

Page 1: ... Power LED is illuminated 3 Verify switch configuration Ensure that the switches on the back of the ENE3400 are positioned correctly to achieve the desired settings for your connection Switches are numbered from left to right Switch 1 is on the left and Switch 2 is on the right Installation Instructions CAUTION Net to Net Technologies strongly recommends the use of proper electrostatic discharge E...

Page 2: ...ction has been established If the Fast Ethernet 100 LED is also illuminated then a 100 Mbps connection has been established Tx Rx Power Adapter Config Fast Ethernet Connection 5V DC E3 Connection Switch 1 is not used on the subscriber unit ENE3400 S Clock source configuration for the ENE3400 S is determined by the switch setting on the provider unit ENE3400 P Switch 1 ENE34000 P only Clock Source ...

Page 3: ... the unit s partner ENE3400 will have LOS as well Note When an ENE3400 has LOS the Ethernet link will be disabled and the Ethernet 100 Act and Lnk LEDs will show solid illumination E3 Connection Alm no illumination E3 is operational Note If the E3 Lnk LED also remains unlit then the unit has LOS solid amber Remote Alarm Indication RAI The outgoing connection from the unit has been lost no data is ...

Page 4: ...eavy traffic Note A solid amber Fast Ethernet Act LED can also denote an E3 Alarm if the Fast Ethernet 100 and Lnk LEDs show solid illumination and the E3 Lnk LED remains unlit no illumination no Ethernet activity Either there is no Ethernet link or a link exists but there is no activity Fast Ethernet Lnk solid green Ethernet connection is established If the Fast Ethernet Lnk LED is illuminated bu...

Reviews: