5
VID-C Wiring
NOTE
The VID-C contains semiconductor devices that are susceptible to damage by electrostatic discharge. An
electrostatic charge can build up on the skin and discharge when an object is touched. Therefore, use
caution when handling the device, taking care not to touch the terminals or electronic components. For
more information on proper handling, refer to 'Electrostatic Sensitive Device Handling Procedure', in
Appendix A.
Refer to Figure 3 for wiring information. An RCA jack is terminated at the end of the 3 foot coaxial cable.
Coaxial cable transmission is up to 1000 feet without amplification. Regular video cable
transmission is from 500 feet to 700 feet maximum.
NOTE
:
The wiring procedures in this manual are intended to ensure proper functioning of the device under
normal conditions. However, because of the many variations in wiring codes and regulations, total
compliance to these ordinances cannot be guaranteed. Be certain that all wiring complies with
applicable regulations that relate to the installation of electrical equipment in a hazardous area. If in
doubt, consult a qualified official before wiring the system
.
Summary of Contents for VID-C
