8
4xN 10/100/1000 Span iMatrix Switch
2. Change the password by typing the following command:
set password <password>
where
<password>
is your new password.
3. Record the username and password in a secure location.
To set the iMatrix Switch IP address:
1. Type
set ip <ip address>
where
<ip address>
is the IP address you are
assigning to the iMatrix Switch and press
Enter
.
For example, typing
set ip 10.60.0.100
sets the iMatrix Switch IP address
to 10.60.0.100.
To display current settings:
1. Type
show set
and press
Enter
. The CLI displays the current settings
similar to the example in Figure 10.
Figure 10:
Show Set Command Example
To disable the remote interfaces:
1. Type
show display
and press
Enter
to view the current setting. The default
value is Display: ON.
2. Type
display
and press
Enter
. Access to the iMatrix Switch from remote
interfaces will be blocked.
3. To restore the display and remote interfaces, type
display
and press
Enter
.
show set
IP
Address:
10.60.0.123
Netmask:
255.255.0.0
Manager:
10.10.1.40
Gateway:
10.60.0.118
HW
Version:
REV
1.00
SW
Version:
REV
1.00
Port 1 Parameters: Gigabit
Port 2 Parameters: Gigabit
Port 3 Parameters: Gigabit
Port 4 Parameters: Gigabit
