10 GigaBit Media Converter Tap
Redundant power ensures link uptime
Compatible with all singlemode and multimode fibers
Fully IEEE 802 .3ae compliant
Ease of Use
LED indicators show link status and redundant power
All network and monitor cables included
Front-mounted connectors support easy installation and operation
Connectors are perfectly angled to reduce cable strain
Silk-screened application diagram illustrates all connections for easy deploy-
ment
Tested and compatible with all major manufacturers’ monitoring devices, in-
cluding protocol analyzers, probes, and intrusion detection/prevention systems
Support
Net Optics offers free technical support throughout the lifetime of your
purchase. Our technical support team is available from 8 am to 5 pm Pacific
Time, Monday through Friday at +1 (408) 737-7777 and via email at ts-sup-
port@netoptics .com . FAQs are available on Net Optics website at www .
netoptics .com .
Unpacking and Inspection
Unpack the 10 GigaBit Converter Tap and verify that you have all components
by checking the Packing List against goods received .
The 10 GigaBit Converter Tap ships with the following:
2 Power cables
2 Network cables
1 Monitor cable
1 Installation Guide
If you purchased an extended warranty with your Converter Tap, registration
information is also included . If any part is missing or damaged, immediately
contact Net Optics Customer Service at 1 408 737 .7777 .
About This Guide
This guide explains how to install the Converter Tap . Please read the Guide
before attempting to install the Converter Tap .
•
•
•
•
•
•
•
•
•
•
•
•
•
•
