Net 1 N123201 Assembly Instructions Manual Download Page 2

 

 

 

 

 

 

 

 

 

 

 

   

       

 

 

   

 

 

 

     

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT 

IN SERIOUS INJURY AND/OR PROPERTY DAMAGE

Owner must ensure that all players know and follow these rules 

for safe operation of the system.

injuring others. Release the rim as soon as safely possible.

• During play, especially when performing dunk type activities, 

keep players face away from the backboard, rim and net. 

Serious injury could occur if teeth/face come in contact with 

backboard, rim, or net. 

• DO NOT slide, climb, or play on base or pole. 

or the system will tip quickly causing serious personal injury. 

• When adjusting height or moving system, keep hands and 

• DO NOT allow children to move or adjust system. 

• During play, do not wear jewellery (rings, watches, necklaces, 

etc. Objects may entangle in net.

• Surface beneath the base must be smooth and free of gravel 

or other objects. Punctures can cause leakage and could cause 

system to tip over. 

• Keep water and organic material away from pole. Pole can 

rust and fall. 

• Once a month check pole and all metal parts for rust. 

Completely remove rust and repaint with exterior enamel. If 

rust has penetrated any steel part, replace the part 

immediately. 

• Check system before each use for proper ballast, loose 

hardware, instability, and signs of corrosion and repair before 

each use. Never play on damaged equipment.

• DO NOT use system during windy or severe weather, system 

may tip over. Place system in an area protected from the wind 

or in an area away from property that may be damaged if the 

system falls. 

WARNING

UK: 

+44 115 985 3500

Summary of Contents for N123201


















Reviews: