2
For Startup:
1.
Turn water on at main shutoff going to machine.
2.
Make sure drip tray is installed.
3.
Turn power on at the on/off button in back of machine.
4.
Open the front door.
5.
Turn the canister chutes in the up position.
6.
Remove canisters and fill product to the required fill line.
7.
Place filled canisters in the assigned slots and turn chute to the down position.
8.
Reset canister count by pressing buttons F1-edit on the service key then select yes to confirm.
9.
Initiate a rinse cycle. Push & hold buttons 1 & 2 simultaneously for more than 5 seconds to start the rinse
process of all mixing-bowls. Discard water from the drip tray.
10.
Machine is ready for use,
If you have any questions, please do not hesitate to call:
