Page 6
Line up the cables to leave the Battery Box
through the cable slot in the bottom of the
box.
If you choose at any time to power the system
using the mains power supply, you should
remove the batteries, and disconnect the Solar
Panel. Then connect the PP3 connector on
the mains power supply to the mating PP3
connector in the Battery Box marked with a
yellow sleeve. .
4.3
Set up the Receiver and Connect to TV
Screw the Antenna onto one end of the Receiver.
Adjust the angle of the Antenna so that it is approxi-
mately vertical. The receiver can be mounted vertically
using the screw holes provided, or rested in a horizontal
position.
Fit the Receiver Mains Power Supply (it has a cylindrical
plug) to the Receiver (DC 9-12V) and plug it into the
Mains. Switch the power on. The red indicator light will
show it is on.
Fit one end of the Receiver Video/Audio Lead to the Re-
ceiver, connecting one colour to “VIDEO OUT” and the
other colour to “AUDIO OUT”.
Page 4
SCREW ANTENNA
ONTO RECEIVER
Cable from
Nest Box
Goes here
Cable from
Mains Power
Supply Unit
Goes here
Cables from
Solar Panels
Or Wind
Generators
Go here
