Page 7
4.
Set up the Receiver
Fit the Antenna onto the Receiver bt screwing it on
where marked. Adjust it to a vertical position.
Plug in the Mains Power Supply Unit and switch on.
The red light will indicate power is on.
Set the slider switch to the Camera’s channel (This is shown
on the back of the Camera)
Fit one end of the Receiver Video/Audio Lead to the Receiver, connecting
one colour to “VIDEO OUT” and the other colour to “AUDIO OUT”.
Fit the other end of the Receiver Video/Audio Lead to the direct input video
and audio connectors of your TV. Connect the colour you connected to
“VIDEO OUT” on the Receiver to Video In on the TV, and the colour you
connected to “AUDIO OUT” on the Receiver to the Audio In socket on the
TV.
Turn on your TV and set it to Video Input.
You should now be able to see the pictures from your Camera, and hear the
sounds picked up from the microphone in the camera.
As an alternative to using Video and Audio In sockets, you can use a SCART
socket on the TV. For this you need a small SCART adaptor, such as the one
(Code A51) in our accessory range.
Page 5
SCREW ANTENNA
ONTO RECEIVER
