22
WHERE TO INSTALL A SMOKE ALARM
Nest recommends the following installation
Multi-family or mixed occupant residence
(Tenancy building, student accommodation)
Your smoke/CO alarm can also be used in
individual flats and bedsits, providing the same
conditions are met as for a single-family
residence However, there must already be a
primary fire detection system that meets
regulatory requirements for common areas
such as lobbies and hallways
Institutions and Hotels
This includes guest houses, hospitals, day-care
facilities, long-term health-care facilities, B&Bs
and halls of residence Your smoke/CO alarm can
be used in individual sleeping areas/residents’
rooms, provided that the same conditions are
met as for a family residence However, there
must already be a primary fire detection system
that meets regulatory requirements for common
areas such as lobbies and hallways Use of this
smoke alarm in common areas may not provide
sufficient fire warning to residents or meet
regulatory requirements
Commercial and Industrial Premises
This smoke alarm is not intended for any
non-residential, commercial or industrial
application, nor for any other purpose than that
described above
INSTALLATION CODE
Specific requirements for smoke alarm
installation vary from country to country, and
from region to region Check with your local Fire
Service for current requirements in your area
WARNING
Smoke alarms are designed to alert you
with an audible alarm at a level specified
by AS 3786:2014
WARNING
The smoke alarm accompanying this
user guide employs the latest technology
and is independently tested as being
compliant with guidelines established
by Standards Australia However, as with
any electronic product it may fail and
may not sense all types of fire within
sufficient time to alert you of the danger
and provide adequate time for your
escape In order to maximise your level
of safety always test your smoke alarm
frequently to ensure it is in full
working order
WARNING
There is a risk of malfunction and
electrical shock, if the smoke alarm
is tampered with
Your smoke/CO alarm is only suitable for use in
domestic residential applications, as covered in
this user guide It is not suitable for commercial
or industrial applications It is designed to sense
smoke and carbon monoxide, and alert you
It will not prevent or extinguish fires
Summary of Contents for A0124
Page 1: ...Nest Protect Battery Smoke and carbon monoxide alarm User Guide Let s get started ...
Page 2: ...2 ...
Page 31: ...31 ...