Ness ID Teck 505R, User Manual, Page: 49 / 64

101-046 49 FGR006 – Version 3.0
IDTeck - 505R - 1 DOOR ACCESS CONTROLLER
9.4.4 LCD TEST
9.4.5 KEYPAD TEST
9.4.6 READER TEST
Last Update
LCD TEST
READER TEST
0123456789ABCD
KEYPAD TEST
Scanning ...
Reader 1
Card #
Reader #
☞
. Press <ENT> key to continue the test. LCD will display all
characters on the screen.
☞
. When the test is done, the LCD will show “Last Update Press any
key”. Press any key to return to Set-up menu.
☞
. Press <ENT> key to start the keypad test.
☞
. LCD will display “0123456789ABCDEF” on the bottom line of
LCD. Press each key from the keypad. The depressed key will
disappear from the LCD. Note that F1 key is “A”, F2 key is “B”,
F3 key is “C”, F4 key is “D”, ESC key is “E” and ENT key is
“F” on the screen. After the test is done, it returns to set-up
. Press <ENT> key for the reader test.
☞
. LCD will display “Scanning…” for reading the cards. Present the
card to one of the readers.
☞
. When the reader successfully read the card, LCD will display
reader number and the 8-digit card number on the LCD. Press
<ESC> key to return to the set-up menu.
ID number of SR505 is a 10 digit Decimal number.
OUTPUT 5
OUTPUT TEST
☞
. To test the outputs, press <ENT> key.
☞
. The output test will proceed on and off twice for each output. The
first two tests are for the output relays (Relay#1~Relay#2). You
can hear the mechanical sound of relays and following two tests
are for TTL output testing. The last test is for the built-in buzzer
and you can hear two beep sounds. Press any key to return to the
set-up menu.