NESS D8X / D16X DELUXE CONTROL PANEL – USER'S MANUAL
10
OPERATION
The control panel must be armed in order to
detect intruders.
Sealed
by
making sure there is no movement in rooms
protected by motion detectors. Doors or
windows protected by reed switches should
be closed.
The panel cannot be armed if in Program, Home
(Monitor), Memory or Exclude modes or if it is
in alarm. (User codes that are programmed to
be
A
RM
O
NLY
codes can arm the panel either the
disarmed state or from Home Mode.
A keypad is supplied with the panel. Operation
by Radio keys and access cards is optional.
ïð
10 beeps when you arm means
Mains Power is turned off or the backup battery
is low.
One long beep when you arm could
mean the panel is already armed or the keypad
code is wrong, (if not using Shortcut Arming).
SIREN WARNING:
Sealed
. If any are
Unsealed
, the siren will sound
been automatically excluded. You should disarm
the panel, check the premises and then arm
again. Continual warnings could mean there is
may have to be manually excluded.
the auto-exclude option is disabled, the siren
will sound for the duration of siren time, (default
is 5 minutes).
TO
ARM
the panel
by
KEYPAD
by
RADIO KEY
by
ACCESS CARD
or
FOB
Press
+
(If the
A
RMING
S
HORTCUT
is enabled).
Press the ON button once.
The strobe light will flash
briefly.
If programmed, the
external siren will
chirp
once.
(If Home Arming by
Radio Key is enabled, the
chirp will be delayed by
5 seconds).
Present a Card or Fob
twice.
Or, present a Card
or Fob once + press
button.
Depending on which
option has been enabled
by your installer.
or press
+
[U
SER
C
ODE
]
+
or press
[U
SER
C
ODE
]
+
(If
C
ODE
O
NLY
A
RMING
has been enabled
by your installer).
The
A
RMED
light will turn on.
Leave the premises within the
Exit Delay Time.
3 beeps will sound at the end of
Exit Delay Time.
www.msealarms.com.au
