5
1.4
Installation (For Rugged Camera)
For Rugged Camera, we suggest you to install the Camera as the following
steps to make sure the Camera is well waterproof.
Step 1:
Put the Rubber Washer in both sides
of the holes on the Bottom Plate of
the Camera.
Step 2:
Aim the installing hole to the target
installing position and fasten the
screws to attach the Camera to the
ceiling.
Step 3:
Refer to
1.5 Connectors
and
2. Camera Cabling
to connect the cable and
adjust the lens.
Step 4:
Aim the arch parts on both Dome
Cover and Bottom Plate to attach
two parts firmly together. And then
fasten the security screws on the
Dome Cover to finish installing the
Camera.
